Cable pullers or wire rope pulling machines can be a convenient, effective winch option for a variety of duties, they make a great forestry winch with their compact size and surprising power creating an excellent combination suitable for safe lifting, pulling and load tensioning. Lifting Gear Direct has lots of options in the cable winch puller and wire rope winch categories, Prices start under £145, so read on for the lowdown.
£114.91
About the Deltafor cable puller winch The Deltafor wire rope cable puller is ..
£144.53
About the 800kg Cable Puller Cable pullers are the ideal tool for all work..
£122.48
About the Yale LMG Cable Grip This device can be used with cable or wire rope..
£197.42
About the 1600kg Cable Puller Lift, pull and tension loads easily with thi..
£347.39
About the 3200kg Cable Puller This Cable puller is ideal to lift..
£735.70
Tirfor Winch TU8 Basics The heavy duty Tirfor TU8 model is the lightest o..
£1,087.87
Tirfor Winch TU16 Basics The heavy duty Tirfor TU16 has a maximum lifting..
£1,638.00
Tirfor Winch TU32 Basics The Tirfor TU32 is the largest and heaviest of the TU ..
£332.22
Y08 Yaletrac cable puller Features This 800kg capacity model is compact &..
£483.85
Y16 Yaletrac Cable Puller Features This 1600kg capacity model is lightweight at..
£923.48
Y32 Yaletrac cable Puller Features This larger capacity 3200kg cable puller wei..
POA
Key Features of the Yaletrac ST Cable PullerThis easy to use cable puller is v..
Unlike other winches we stock, a cable puller will be compact and easy to transport in comparison. Our high quality models are also straightforward to maintain and represent a cost-effective investment for a variety of commercial users.
A cable puller is an easy to use device which incorporates clamping jaws which move in a manner which pulls the wire rope cable through in small increments. Each jaw movement occurs with the crank of a lever and depending on the setting the cable and load attached can be pulled through forwards or in reverse.
Very little! They both work in the same way and do the same job. The Tirfor winch is the original design of a cable puller.
A cable puller can handle any length of wire rope due to the fact that the cable simply passes through the device, in one end and out the other.
This will depend on the cable puller model chosen, there are 3 typical safe working load models, 800kg, 1600kg and 3200kg, although the pulling capacity can be increased by using sheave blocks which can also deflect the pulling angle.
