Tirfor t500 cable puller series

My Cart
Fast Delivery  -  Low Prices  -  Buy online  -  Trade accounts
Tirfor T500 Cable Puller Series

Tirfor T500 Cable Puller Series

Lift, Pull, tension or position loads with the Tirfor T500 cable puller series. Three models are available, the T508 with working load limits to 800kg, the T516 with WLL to 1600kg and the T532 with working load limits of 3200kg.


  • Product Code: Tirfor T500 Cable Puller Series

Call 01384 76961 for price.

About the Tirfor T500 Cable Puller Series.


Lightweight and quite compact the Tirfor 500 cable pullers can easily be handled and operated by a single person in any direction. Ideal for lighter duty tasks. The Tirfor TU models are better suited to heavier duty operations.

These Tirfors use a specific type of wire rope cable which can be of any length, although 20 metres is the usual standard. These long lengths should be handled with care to prevent kinks and twists in the rope which can cause issues. Wire rope should be kept on a reeler, this protects the cable but also helps with the handling.


Like most cable pulling machines the Tirfor 500 series can have the lifting and pulling capacity increased with the use of sheaves block pulleys. This is commonly known as the sheave block technique.


The Tirfor pulling winches use self actuating jaws to grip and pull the cable through. The heavier the load or force applied the tighter the jaws clamp. There is also a secure release system, ideal when threading and removing cable from the machine.


Overload protection comes in the form of sheer pins. An additional set is included as standard.


Using a Tirfor T500 Pulling Machine


These machines are pretty simple to set up and operate. Firstly the machine needs to be secured to an appropriate anchor point, one that can take the pulling forces applied by machine and load.

There is a quick action anchor pin at the nose end of the cable puller. It is kept permanently attached to the machine body with a small chain to ensure it doesn't get lost. The pin incorporates a spring clip and sling design.

When it comes to installing the cable you will find a release mechanism, complete with an additional safety catch, to open the jaws so the rope can be pushed through without hindrance, the same applies when removing the rope. Don't forget to re-engage the jaws before continuing with your operation.


The cable can be advanced through the jaws in either direction, simply place the telescopic handle on either the forwards or reverse lever and crank with a back and forth motion.


Always read the operating manual before use, inspect your machine and rope regularly for issues and re-lubricated with the appropriate oil. (type SAE 90-120 is advised).

See the download manual for more correct operation, safety instructions, troubleshooting tips and more.


Specifications

Model WLL Rope Diameter Effort to control lever Rope Travel Weight
kg mm forward kg reverse kg Forward mm Reverse mm kg
T508 800 8.3 35 12 46 63 7
T516 1600 11.5 48 18 42 57 14
T532 3200 16.3 45 25 18 36 24

Dimensions

Dimensions mm
Model A B C D E F G H I J K
t508 20 420 64 212 15.3 38 60 165 230 405 690
t516 30 530 77 252 21.3 50 84 193 315 648 1147
t532 40.5 631 107 283 29 69 97 240 357 648 1147