Your shopping cart is empty!
Hollow cylinders can be used as a power source for puller sets and test rigs for example; pre-stressing anchors, removing axles, tubes & shafts are all achievable with a hollow cylinder, though perhaps one of the most common uses will be for heavy duty pulling applications and repairs and assembly tasks.
The rod can be adjusted via the nut to obtain larger distances.
Lifting Gear Direct can supply these single acting hollow cylinders in a range of models which have lifting capacities from 10 tonne up to 100 tonne and with standard stroke lengths between 41mm and 75mm depending which model you choose. All the technical specifications are in the tables below should you need more information.
Floor jacks,bottle jacks, pumps and other types of cylinders are the other hydraulic equipment we supply for lifting purposes. This is our standard range by Tecpos but we also supply Yale, hi-force and Enerpac should you require it; check out our shop by brand pages to find brand respective hydraulics.
Get in touch with Lifting Gear Direct if you need advice or help to choose the best lifting equipment for your needs. Remember we can also repair, test and inspect lifting equipment as we have our own team of engineers.
Model | Cyl. Cap. | Stroke | Cyl. Effective Area | Oil Cap. | Retracted Height | Extended Height | Cyl. Out Dia. | Centre Hole Dia. | Collar Thread | Collar Thread Length. | Base to Inlet Port | Weight | Pump |
(tons) | (mm) | (cm2 | (cc) | A | B | C | D | E | F | G | (kgs) | ||
TCH-1041 | 10 | 41 | 17.6 | 70.5 | 121 | 162 | 70 | 20 | - | - | 25 | 2.8 | 1B |
TCH-2050 | 20 | 50 | 31.67 | 158.4 | 162 | 212 | 98 | 27 | 1 9/16 | 24 | 20 | 7.6 | 1B |
TCH-3063 | 30 | 63 | 47.7 | 300.6 | 179 | 242 | 115 | 33 | M48xP1.5 | 20 | 21 | 10.9 | 1B |
TCH-5075 | 50 | 75 | 87.46 | 656 | 249 | 324 | 158 | 54 | M70xP2 | 28 | 30 | 27.2 | 1C |
TCH-10075 | 100 | 75 | 143.13 | 1049 | 254 | 329 | 216 | 80 | M103xP2 | 28 | 35 | 52.5 | 1C |