Using the DT250 Drum Truck

The hydraulics in this drum truck ensures easy lifting of a steel drum. The sturdy wheels and rear swivel castor makes transportation quick and easy with minimal effort required.

To grab the drum for lifting simply position the truck around the drum; press the handle (5) repeatedly to raise the frame until the drum’s rim is between the clamps teeth and the teeth on the frame.

Once in position, by pushing the knob/lever (7) the clamp (8) will firmly grab the drum in its teeth; you can now lift the drum to the required height by pumping up the lifting frame with the handle (5).

To transport the drum you simply use the handle (5) to push, pull and steer the truck. The handle can rotate to aid the changing of direction. It is recommended that drums are transported whilst in the lowest possible position to ensure good stability.

To set down and release the steel drum with the DT250 you need to slowly screw the discharge joystick in a counter-clockwise direction and lower the drum until it makes contact with the floor. Now you can push back the knob (7) to release the jaws of the clamp and therefore releasing the drum.

Maintenance of the DT250 Drum handling Truck.

Routine checks should be carried out to ensure there are no defects which could hamper the safe operation of the truck. Check the chassis, grab, teeth and wheels for wear, cracks and loose connections. The hydraulic oil should be refreshed periodically too to ensure smooth operation continues.  If any significant wear or defects are noted then discontinue use until it has been thoroughly inspected by a competent professional and deemed safe to use.

Contact LGD

If you would like to discuss any aspect of the DT250 drum truck or any of our other drum handling equipment you can call us on 01384 76961. If you would like a price on this product and/or any other lifting equipment you can use the request a quote button. Emailing us can also be achieved via our contact page or rapid enquiry form.