Your shopping cart is empty!
Unlike the DTG-AU which are fully automatic in operation, this DTG model are semi-automatic and require just a little manual intervention to lock on to a drum. All that is needed is the lever to be engaged to grab a drum or released to set down a drum, it’s really quite simple and minimal effort is required.
This particular model is slung and can be utilized on a crane or hoist hook or even slung under the tines of a forklift truck with the addition of a yoke attachment.
The DTG attachment has a suspension eye/pin for easy fitting to a crane or hoist hook for example. When you are ready to begin the lifting operation ensure the drum is positioned under the device. Once the grab pads are locked in the open position lower the tongs directly over the drum until contact is made, when resting on the drum you can operate the lever to disengage, then as you slowly lift the device the 4 grab pads will automatically close up under the top rim of the drum holding it firmly for lifting.
When the drum is lowered back to the ground and the tongs lowered slightly to slacken, the grab pads will open, the latching lever can then be flipped over which will automatically release the drum.
Lifting Gear Direct can supply, repair, service and inspect all types of lifting equipment as well as our extensive range of drum handling equipment. We have products to lift and transport a range of drum types in different ways, vertically, horizontally or rotated. Grabs, tongs, drum trucks & trolleys and fork lift mounted devices are all available at great prices.
Browse our product range and get in touch with your needs via phone, rapid response form or get a quote button. Help and advice will always be given when requested to the best of our extensive knowledge.
Model | Capacity (KG) | No. Of Drums | Weight (KG) | Drum Type |
DTG-1 | 500 | 1 | 26 | 1 |
DTG-1-HD | 1000 | 1 | 33 | 1 & 2 |
DTG-1-M | 500 | 1 | 28 | 4 |