Your shopping cart is empty!
The TSZ is essentially the same as the TSD but with the addition of a second lifting point.
The extra lifting point enables the load to be pulled in 2 different directions giving greater versatility than the standard TSD.
Ideal for pulling and positioning angled steel when used with a lever hoist.
Unique, easy to use spindle design with 3 different jaw capacities (depending on model).
PLEASE NOTE:
Plate hardness must not exceed HRC 30/Brinell 300.
| Model | TSZ500 | TSZ1500 | TSZ3000 | TSZ5000 | TSZ7500 |
| A mm | 28 | 35 | 35 | 40 | 40 |
| B mm | 43 | 60 | 67 | 85 | 92 |
| C mm | 45 | 55 | 65 | 75 | 75 |
| D mm | 125 | 158 | 195 | 230 | 240 |
| E mm | 72 | 93 | 114 | 133 | 143 |
| F mm | 83 | 99 | 120 | 150 | 162 |
| ØG mm | 26 | 35 | 46 | 55 | 65 |
| H mm | 16 | 24 | 34 | 40 | 50 |
| I mm | 12 | 16 | 17 | 18 | 23 |
| J mm | 35 | 50 | 60 | 75 | 80 |
| Model | Capacity (KG) | Jaw capacity (mm) | Weight (KG) |
| TSZ500 | 500 | 0-28 | 2.3 |
| TSZ1500 | 1500 | 0-35 | 5.6 |
| TSZ3000 | 3000 | 0-35 | 8.8 |
| TSZ5000 | 5000 | 0-40 | 16.2 |
| TSZ7500 | 7500 | 0-40 | 20.9 |
