The VTE electric beam trolley travels across a beam at the touch of a button thanks to it being electrically powered. This obviously means it will require a power source. Both 110 volt and 230 volt trolleys are available on request with the standard models having a 400v 3 phase supply.

Key Features of the Yale VTE Electric Beam Trolley

The VTE is electrically powered so will need a power supply

• Ideal for traversing over longer distances and/or for frequent use and on loads over 1000kg.
• The travel motor incorporates a worm gear transmission to ensure a smooth start and self braking system.
• Motors protected to IP 55; Pendant control to IP65
• Operates at 400V, 3ph & 50Hz
• Sturdy and robust, yet compact enough to give a low overall height.
• Universal shackle connection point to make it suitable to use with the majority of hoists with suspension hook.
• Available in 8 models with WLL from 1000kg up to 5000kg. With various speeds and sizes. (please refer to table)
• Anti-drop & anti-tilt devices as standard
• Machined surfaces and bearing mounted for super smooth running.
• Low overall height.

More about the VTE Electric Beam Trolley

The VTE is ideal for use with loads above 1000kg and below 5000kg which is its maximum load limit. The trolley incorporates a universal shackle connection point for the easy attachment of most hoisting devices. This beam trolley is easy to adjust to fit a good range of beam sizes. See the table below for all the details.

We can supply a wide range of other beam attachments including trolleys and clamps as well as loose lifting tackle to compliment them, browse our website to find out more.